Most standalone retail ATMs take up about 2 square feet of floor space (the “footprint”) and are around 4 ½ feet tall.
Below are the dimensions for our two most used and popular ATM models.
GenMega 2500 Dimensions:
Height: 56.3” (4 feet, 8.3 inches)
Width: 15.8” (1 foot, 3.8 inches)
Depth: 22.3” (1 foot, 10.3 inches)
GenMega Onyx Dimensions:
Height: 56.3” (4 feet, 8.3 inches)
Width: 15.8” (1 foot, 3.8 inches)
Depth: 22.3” (1 foot, 10.3 inches)
Hyosung 2700 Dimensions:
Height: 52.3″ (4 feet, 4.3 inches)
Width: 15.7″ (1 foot, 3.7 inches)
Depth: 18.4″ (1 foot, 6.4 inches)
Hyosung Halo II Dimensions:
Height: 54.2” (4 ft, 6.2 in)
Width: 15.7” (1 ft, 3.7 in)
Depth: 23.4” (1 ft 11.4 in)
Space needed for door to open
It is important to remember that there will need to be some additional space in front of the ATM and just to the front-left part of the ATM so the door can swing open and it can be loaded with cash.
ADA Compliance
Section 707 of the Americans with Disabilities Act requires that ATMs are readily accessible to individuals with disabilities. The clear ground/floor space in front of the ATM at a minimum must measure 30 inches by 48 inches. The figure below is a helpful representation of space needed for access.
Still not enough space? Consider a wall-mount ATM.
If space is extremely limited at your establishment and you don’t even have room for a retail ATM, consider getting an ATM such as the Onyx-W which can be mounted to a wall or countertop. This ATM only takes about 3 ½ feet of wall space.
